Filter
Top Products
Page 29
Lift Operating Instructions
TO LOAD PASSENGER:
1. Read Notes below! Load passenger onto plat-
form, lock wheelchair brakes and latch handrail
belt.
Note: Outer barrier must be fully unfolded
(ramp position) until the entire wheelchair (or
standee) has crossed the outer barrier.
Note: Passenger must be positioned fully inside
yellow boundaries.
2. Press UP switch to fold outer barrier UP fully
(vertical), raise the platform to floor level and un-
fold inner roll stop to floor level. Release switch.
3. Unlock wheelchair brakes and unload passenger
from platform.
TO STOW PLATFORM:
1. Latch handrail belt.
2. Press STOW switch until platform stops at stow
level. Release switch.
3. Unlatch handrail belt.
4. Fold outer barrier down to platform (horizontal)
position.
5. Lift handrail latch handles, stow (fold) handrails
down to platform (horizontal) position and lower
handrail latch handles fully.
6. Press STOW switch until platform stops (retracts
fully). Release switch.
CLOSE DOOR(S)