Filter
Top Products
Page 20
Operation Notes and Details
The folding handrails and tall out-
er barrier are manually operated.
The spring-loaded outer barrier
(tall barrier) and the handrails rest
on the platform when the lift is not
in use. The outer barrier must be
raised to the vertical position and
the handrails must be lifted to the
vertical position whenever a pas-
senger is on the platform.
The tall outer barrier and the
handrails must be folded down
to the platform (horizontal) posi-
tion before stowing the lift. The
handrails fold down onto the
outer barrier to secure the barrier
in the horizontal position. Each
handrail is secured with a latch
handle.
Barrier, Handrail and Belt Manual Operation
The latch handles must be lifted
before the handrails can be
folded or unfolded and must be
lowered after folding or unfold-
ing the handrails.
Interlocking Handrail Belt: The
NUVL855RM24 is equipped with
an interlocking handrail belt.
Once the lift platform has extend-
ed fully from the stowed position,
the belt must be latched in order
to raise or lower the platform.
During the Stow function, the
belt must be unfastened after the
platform raises or lowers to stow
level and stops. With the belt
unlatched, pressing the STOW
switch then retracts the platform
fully.
W
A
RNING
Before stowing lift:
• Lower outer barrier
down to platform.
• Lower handrails down
to platform.
• Lower latch handles
down to platform.
Failure to follow these
precautions may result
in serious bodily injury
and/or property damage.
Refer to the procedures on the
following page for operation of
the barrier and handrails.