Filter
Top Products
Page 12
Lift Operation Safety
Lift attendants must ensure that lift occupants keep hands,
arms and all other body parts within the lift occupant area
and clear of moving parts.
Platform must be positioned at floor level (bridging position)
when loading or unloading in and out of vehicle.
Do not use platform inner roll stop or outer barriers as a
brake. Stop and brake wheelchair when loading onto the
platform (manually stop and brake manual wheelchairs
— stop powered wheelchairs with the wheelchair controls).
Turn powered (electric) wheelchairs off when on lift platform.
Press the DOWN switch until the entire platform rests on
ground level (lowered fully) and the outer barriers are fully
unfolded (ramp position) before loading or unloading a pas-
senger at ground level.
W
A
RNING
Lift Operation Safety Precautions (continued)
W
A
RNING
If the lift operating
instructions, manual
operating instructions
and/or lift operation
safety precautions are
not fully understood,
contact The Braun
Corporation immedi-
ately. Failure to do so
may result in serious
bodily injury and/or
property damage.
W
A
RNING
W
A
RNING
W
A
RNING
W
A
RNING
W
A
RNING
Both outer barriers must be fully unfolded (ramp position) until front and rear wheelchair
wheels cross the barriers when loading or unloading at ground level.