Page 19
Fully-Deployed
Outer Barriers
(Up-vertical)
Operation Notes and Details
occupied. Lift platform move-
ment shall be interrupted unless
the outer barrier is fully deployed
(up).
The attendant must view the
platform as it lowers to be certain
the entire platform reaches and
rests safely on the ground. Stop
pressing the DOWN switch if any
portion of the platform is obstruct-
ed while descending or the entire
platform does not reach ground
level for any reason (contact
with an obstruction, mechanical
failure, exceeding the lift "floor-to-
ground" capacity, etc.). After the
platform is fully lowered, the at-
tendant should continue to press
the DOWN switch to unfold the
outer barrier fully (ramp poition).
Note: The barrier must be fully
unfolded until the entire wheel-
chair (or standee) has crosed the
barrier when loading or unloading
at ground level. Discontinue lift
operation immediately if the
outer barriers do not operate
properly.
Fully-Unfolded
Barriers
(Ramp position)
Outer Barrier