Filter
Top Products
Aruba Mobility Controller Configuration Guide
VIEW Certified
Page 4
Via the CLI
By default, only SSH (Secure SHell) access to the switch (mobility controller) is permitted.
1. From a management system that has network connectivity to the switch, connect to the
switch using SSH:
ssh admin@<switch IP address>
2. Enter the admin password at the password prompt.
3. Type enable at the > prompt to enter the enable mode.
4. Type the enable password when prompted for a password.
Via the Web interface
Once the connectivity to the switch is verified, open a Web browser and enter the switch’s IP
address in the navigator bar.
The switch can be accessed using http, http://<switch IP Address>
or https, https://<switch IP Address>:4343.
The user is prompted with the username and password configured (in the example above, the
username/password configured is admin/admin). On successful login the following
Network Summary screen is displayed: