Filter
Top Products
Aruba Mobility Controller Configuration Guide
VIEW Certified
Page 13
11. Click the 802.11 a tab.
12. For Max Retries, enter 2 for voice.
13. For the DTIM period, enter 3.
14. For Basic Rates and Supported Rates, consult the facilities RF site survey to determine
if coverage is sufficient to support all data rates.
15. To assign the power and channel setting manually:
a. For ARM Assignment, select Disabled.
b. Clear the ARM Scanning check box.
c. Set the Default Channel and Initial Transmit Power from their drop-down lists.
16. For Mode, click the Access-point option.
17. Click the Apply button.