Filter
Top Products
Other useful features
High resolution mode. Offers up to 12 bits
of vertical resolution in real-time, single-shot
mode. This is accomplished by serially fi lter-
ing sequential data points and mapping the
fi ltered results to the display when operating
at time base settings greater than 10-μs/div.
Help is at your fi ngertips. An embed-
ded help system – available in 11 languages
– gives you quick answers if you don’t un-
derstand a feature. Simply press and hold the
corresponding front-panel key, and a screen
pops up to explain its function.
Waveform math with FFT. Analysis func-
tions include subtract, multiply, integrate,
square root, and differentiate, as well as fast
Fourier transforms (FFT).
Peak detect. 250 ps on 500-MHz and 1-GHz
models, 500 ps on 350-MHz models and 1 ns
on 100-MHz models helps you fi nd narrow
glitches.
AutoProbe interface. Automatically sets
probe attenuation factors and provides power
for selected active probes, including the
award-winning 1130A 1.5-GHz Infi niiMax
differential active probe and 1156A 1.5-GHz
single-ended active probe systems.
5-digit hardware counter. Measures
frequency up to the bandwidth of the scope.
Trig Out and Reference Clock In/Out.
Provides an easy way to synchronize your
scope to other instruments. Use the Trig Out
port to connect your scope to a frequency
counter for more accurate frequency measure-
ments or to cross trigger other instruments.
Autoscale. Displays all analog and digital
active signals, and automatically sets the
vertical, horizontal and trigger controls.
23 automatic measurements with Quick-
Meas.
Pressing [QuickMeas] brings up the
last four automated measurements selected.
Cursors automatically track the most recently
selected measurement.
Analog HDTV/EDTV trigger. The 6000
Series comes standard with analog HDTV/
EDTV triggering for standards like 1080i,
1080p, 720p and 480p as well as standard
video triggering on any line within a fi eld,
all lines, all fi elds and odd or even fi elds for
NTSC, SECAM, PAL and PAL-M video signals.
Bus mode display (on MSO models).
Quick and easy read-out of hexadecimal or
binary representation of logic signals.
Easy software upgrades. System software
is stored in fl ash ROM that can be upgraded
from the scope’s built-in USB port or LAN. You
can fi nd the latest system and IntuiLink soft-
ware at: www.agilent.com/fi nd/mso6000sw
Press and hold a key for instant help.
FFT allows you to view the spectral
content of this clock signal.
Digital signals can be displayed indi-
vidually or as overlayed bus values.
5