Filter
Top Products
Performance characteristics (continued)
Storage
Save/recall (non-volatile) 10 setups and traces can be saved and recalled internally.
Optional secure environment mode ensures setups and traces are stored to internal volatile
memory so data is erased when power is removed. Compliant to NISPOM Chapter 8
requirements.
Storage type and format USB 1.1 host ports on front and rear panels
Image formats: BMP (8-bit), BMP (24-bit), PNG (24-bit)
Data formats: X and Y (time/voltage) values in CSV format, ASCII XY and binary format
Trace/setup formats: Recalled
FFT
Points Fixed at 1000 points
Source of FFT 1, 2, 1+2, 1-2, 1x2, MSO/DSO6xx4A: 3, 4, 3+4, 3-4, 3x4;
where 1, 2, 3, 4 represent the analog channel inputs 1, 2, 3, and 4
Window Rectangular, flattop, hanning, Blackman Harris
Noise floor –50 to –90 dB depending on averaging
Amplitude Display in dBV, dBm at 50 Ω
Frequency resolution 0.05/time per div
Maximum frequency 50/time per div
I/O
Standard ports USB 2.0 high speed device, two USB 1.1 host ports, 10/100-BaseT LAN, IEEE488.2 GPIB,
XGA video output
Max transfer rate IEEE488.2 GPIB: 500 kbytes/sec
USB (USBTMC-USB488): 3.5 Mbytes/sec
100 Mbps LAN (TCP/IP): 1 Mbytes/sec
Supported printers via USB For a list of currently supported printers visit www.agilent.com/find/InfiniiVision-printers
General characteristics
Physical size 35.4 cm wide x 18.8 cm high x 28.2 cm deep (without handle)
39.9 cm wide x 18.8 cm high x 28.2 cm deep (with handle)
Weight Net: 4.9 kgs (10.8 lbs) Shipping: 9.4 kgs (20.7 lbs)
Probe comp output Frequency ~1.2 kHz; Amplitude ~2.5 V
23