4
2. INTRODUCTION
This manual describes how the SW Series Super Wash Down Scales work and how to
get the most out of them in terms of performance. Please read this manual completely
before using the scale.
3. FEATURES
The SW Series Super Wash Down Scales have the following features:
Dust-tight and water-tight construction, complying with IP69K.
The weighing platforms and weighing pans are made of stainless steel (SUS304).
The weighing platforms are designed for easy cleaning and not to collect dust.
Three sizes of weighing platform are available.
Employing touch-sensitive switches enabled the display to be covered with a plastic
sheet, resulting in better dust-tight and water-tight performance.
When a switch is touched, the corresponding LED, above that switch, turns on to
indicated that the switch has been touched.
A bright LED display, with a broad viewing angle.
Three types of weight display resolution are available to cover various applications,
1/3,000, 1/6,000 (1/7,500 for some models) and 1/12,000 (or 1/15,000 for some
models). (To be selected in the function settings.)
The counting mode easily counts the number of objects of the same weight.
The comparator mode compares the displayed value (weight value) with the
previously set comparator values and indicates the results by the large and bright
LED display. Five-level and three-level comparators are available.
The optional comparator relay output (OP-03) can output the results as a relay
signal.
Available weighing units are kg (kilogram), g (gram), Ib (pound), oz (ounce), Ib-oz
(pound and ounce) and pcs (pieces for the counting mode).
The optional RS-232C serial interface (OP-03) or optional RS-422/485 serial
interface (OP-04) can transmit the weight value to a printer or personal computer.
The optional sealed lead acid (SAL) battery (OP-02) can be installed, allowing the
scale to be used where an AC power source is not available.