25
M4 screw (10 pcs)
Battery NP4-6
“
-
”
(
BLACK
)
wire
“
-
”
terminal
(
BLACK
)
“+” (RED) wire
Dis
p
la
y
rear cove
r
“+” terminal
(
RED
)
Display
13. OPTIONS
13.1. Using the OP-02 SLA battery
The scale can be operated with a sealed lead acid (SLA) battery, available as an
option.
The scale (with no other options) can be operated continuously for about 90 hours
with a fully charged battery.
The battery will take about 15 hours to be fully charged.
The battery life will vary depending on how the scale is used, the ambient temperature
and so on.
A battery, NP4-6 (6V, 4Ah), manufactured by YUASA, is commercially available.
Caution
• There will be risk of leakage, fire or explosion if the battery is connected
improperly or replaced with the incorrect type.
• Dispose of a used battery according to the local laws and regulations.
• Do not handle the battery with wet hands. Take much care not to get the battery wet.
• Do not install the battery under high temperatures and high humidity.
13.1.1. Installing the battery