Filter
Top Products
Troubleshooting
27
Troubleshooting
Check the following items before you contact Accton Technical Support.
1. If mobile users do not have roaming access to the WA5001 Wireless Access Point,
check the following:
• Make sure that all the WA5001s and wireless devices in the ESS in which the WLAN
mobile users can roam are configured to the same WEP setting, SSID, and
authentication algorithm.
2. If the WA5001 cannot be configured using the Web browser (page 7):
• Remove power from the WA5001.
• Push in the reset button located on the back of the WA5001 to restore the factory
default settings.
• Plug the power connector back to the access point.
Accton Networks
802.11a Wireless Products Maximum Distance Table
Important Notice
Maximum distances posted below are actual tested distance thresholds. However, there
are many variables such as barrier composition and construction and local environmental
interference that may impact your actual distances and cause you to experience distance
thresholds far lower than those we post below. If you have any questions or comments
regarding the features or performance of this product, or if you would like information on
our full line of wireless products, visit Accton’s Website at www.acctontech.com
Notes: 1. Outdoor Environment: A line-of-sight environment with no interference or
obstruction between access point and users.
2. Indoor Environment: A typical office or home environment with floor to ceiling
obstructions between access point and users.
Accton 802.11a Wireless Products Maximum Distance Table
Speed and Distance Ranges
Environmental
Condition
72 Mbps 54 Mbps 48 Mbps 36 Mbps 24 Mbps 18 Mbps 12 Mbps 9 Mbps 6 Mbps
Outdoor
Environment
1
35 m
(115 ft)
40 m
(132 ft)
220 m
(726 ft)
250 m
(825 ft
)
320 m
(1056 ft)
350 m
(1155 ft)
380 m
(1254 ft)
450 m
(1485 ft)
500 m
(1650 ft)
Indoor
Environment
2
12 m
(40 ft)
18 m
(60 ft)
25 m
(82 ft)
30 m
(99 ft)
35 m
(115 ft)
40 m
(132 ft)
45 m
(149 ft)
48 m
(157 ft)
50 m
(165 ft)