Filter
Top Products
Quick Installation Guide
6
Software Installation and Configuration
Windows Installation (98/Me/NT/2000/XP)
1. Insert the CD-ROM that comes with the package into the CD-ROM drive on your PC,
and then enter the following command: D:utility\setup. Follow the on-screen
instructions to install the utility program.
2. After you finish the installed utility, choose Programs from the Start menu. Then select
Cheetah Wireless 802.11a, and the configuration utility.
3. The program will then detect all the WA5001 Wireless Access Point(s) on the network.
(Default WA5001 IP address is 192.168.1.20)
4. If DHCP is turned ON (the default setting is Disable, page 16) and a DHCP server is
located on the network, then the access point will automatically be assigned an IP
address when booted. From the list of detected devices (see the above screen), select
and double-click on the unit you want to configure.
5. The Web management window will appear. You can also manually launch a web
browser from a PC and enter the IP address that is assigned to the WA5001. The
WA5001 802.11a AP Web-based configuration page will be displayed.