Filter
Top Products
Advanced Setup
11
Advanced Setup
Click the Advanced setup in the bottom right-hand corner to display additional information
about the access point configuration as shown below:
Note: The Advanced Setup screen allows you
to view and change the current
configuration of the access point. After
modifying the configuration parameters,
you must click on the Apply button to
save the changes. The new settings will
not take effect until you click Apply to
refresh the access point. Then you need
to click the Reboot button to reboot the access point. The Web browser loses
connectivity with the AP Web server when the access point reboots. To establish
a network connection to the rebooted access point, wait until it has finished
rebooting.