Filter
Top Products
Advanced Setup
13
Turbo Mode: You may either Enable or Disable the Turbo Mode. (Default: Disable)
Turbo Mode is the enhanced wireless LAN operating mode (not regulated in the standard
IEEE 802.11a) that can provide a higher data rate. The Normal Mode of the 802.11a
access point provides connections up to 54 Mbps. Enabling Turbo Mode on the 802.11a
access point allows the access point to provide connections with a data rate of up to
72 Mbps.
Note: In Normal Mode, the channel bandwidth is 20 MHz. In Turbo Mode, the channel
bandwidth is increased to 40 MHz. However, there are only three channels
available when the Turbo Mode is enabled (only 1 channel in Japan).
Performance
Data Rate: Select “best” from the drop-down list to optimize the data transfer speed for
your network. (Default: best)
Transmit Power: Set the signal strength transmitted from the access point. The longer
the transmission distance, the higher the transmission power required. (Default: full)