Filter
Top Products
Hardware Installation
5
4. Connect the Power Cable – Connect the power adapter cable to the 3.3 V DC power
socket on the rear panel.
Warning: USE ONLY the power adapter supplied with the WA5001. Otherwise, the
product may be damaged.
The CD-ROM that comes with the package contains a utility program for the access point.
Any updates can be downloaded from Accton’s Web site at:
http://www.acctontech.com.
The WA5001 can be configured over an Ethernet network using RJ-45 cable. You may
connect the WA5001 to a network device such as a hub or switch. Then, run the utility
program, and configure the WA5001 remotely, as described on the next page.