Filter
Top Products
Quick Installation Guide
16
TCP / IP Settings
Set the TCP/IP configuration for accessing the Internet.
DHCP Client: If Enable is selected, the IP address, subnet mask and default gateway can
be dynamically assigned to the access point by the network DHCP server.
(Default: Disable)
Note: If there is no DHCP server on your network, then the access point will
automatically start up with its default IP address, 192.168.1.20.
By using the Wireless Access Point’s built-in DHCP (Dynamic Host Configuration
Protocol) server, you are allowing the Wireless Access Point to handle all the IP
addressing on your Local Area Network (LAN). This can save you much of the time and
hassle of setting up your network.
DHCP Server: If you have a server on your network that requires a static IP address,
select Enable under DHCP Server and then manually assign a static IP address to your
server. (Default: Disable)