A SERVICE OF

logo

Using USB Flash Memory
PSR-S550 Owner’s Manual 87
Registration files, Style files, Song files and MDB files residing on a USB flash memory can be loaded to
the instrument.
You can also play the Song or Style file directly without loading (see page 89).
1
With the USB flash memory device con-
taining the file you want to load con-
nected to the USB TO DEVICE
connector, check that the “CONNECT”
message is shown in the MAIN display.
2
Press the [FILE MENU] button.
3
Use the CATEGORY [ ] and [ ] buttons
to locate the Load item.
4
Use the dial to select the Registration,
Style, Song or MDB file you want to
load.
All user files in the USB flash memory device
will be displayed first, followed by the Regis-
tration files.
5
Press the [EXECUTE] button. The dis-
play prompts you for confirmation.
You can cancel the load operation at this point
by pressing the [-/NO] button.
6
Press the [EXECUTE] button again, or
the [+/YES] button, and the load opera-
tion will begin.
7
A message appears in the display indi-
cating that the operation is complete.
Press the [EXIT] button to return to the MAIN
display.
Loading Registration Files, Style Files, Song Files or MDB Files
If the same file name already exists in the instrument’s internal
memory, it will be overwritten.
CAUTION
< >
The instrument will not recognize the style file if it is moved out of
the USER FILES folder.
NOTE
Once the load-in-progress message appears in the display, the
operation cannot be canceled. Never turn off the power or
remove the USB flash memory during this operation.
CAUTION