A SERVICE OF

logo

Creating Original Styles (Style Creator)
70 PSR-S550 Owner’s Manual
Editing (Quantize and part clear) ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
This function allows you to automatically align the
timing of all recorded notes.
1
Press the CATEGORY[ ]/[ ] button repeat-
edly until “Quantize” appears in the display.
2
Rotate the dial and select the value.
Settings: 1/4, 1/6, 1/8, 1/12, 1/16, 1/24, 1/32
3
Press the [EXECUTE] button.
The “UNDO” message appears.
4
Press the [EXECUTE] button again if you
want to replace with the previous Quantize
value.
Select a desired section for clearing, and then fol-
low the instructions below.
1
Press the CATEGORY[ ]/[ ] button repeat-
edly until “Part Clear” appears in the dis-
play.
2
Press and hold a desired [PART] button for
longer than a second.
A confirmation message appears.
3
Press the [+/YES] button to clear the
selected Part.
Quantize
1/2 3/41/4
1/41/8
1/21/4
Actual recorded
note
When Quantize
is set to 1/8
When Quantize
is set to 1/4
1 measure
< >
If the recorded Part is not specified, Quantize cannot be set. Specify
the Part for recording and then use the quantize function.
The undo icon on the display will disappear if you exit from the cur-
rent display.
NOTE
Clearing a recorded Part
< >
•You can also select a Part by rotating the dial. In this case, press the
[EXECUTE] button to clear.
NOTE