Accessory CD-ROM Installation Guide
102 PSR-S550 Owner’s Manual
Installing the driver on Windows 2000
1
Start the computer and use the “Administra-
tor” account to log on to Windows 2000.
2
Select [My Computer] ➔ [Control Panel] ➔
[System] ➔ [Hardware] ➔ [Driver Signing] ➔
[File Signature Verification], and check the
radio button to the left of “Ignore-Install all
files, regardless of file signature” and click
[OK].
3
Insert the included CD-ROM into the CD-ROM
drive.
The Start window will appear automatically.
4
First, make sure the POWER switch on the
instrument is set to OFF, then use a USB
cable to connect the USB connector of the
computer to the USB TO HOST connector of
the instrument. When the instrument is turned
on, the computer automatically displays the
“Found New Hardware Wizard.” Click [Next].
(The Wizard window may take a while to display on
some computers.)
If the Wizard window is not displayed automatically,
refer to “Troubleshooting” (page 104).
5
Check the radio button to the left of “Search
for a suitable driver for my device (Recom-
mended).” Click [Next].
6
Check the “CD-ROM drives” box and uncheck
all other items. Click [Next].
7
Click [Next].
8
When the installation is complete, the system
displays “Completing the Found New Hard-
ware Wizard.” Click [Finish].
(The Wizard window may take a while to display on
some computers.)
9
Restart the computer.
The USB-MIDI driver installation is complete.
Installing the driver on Windows Vista
1
Start the computer and use the “Administra-
tor” account to log on to Windows Vista.
2
Insert the included CD-ROM into the CD-ROM
drive.
The AutoPlay window will appear.
3
Click [Run Start.exe].
The Start window will appear automatically.
4
First, make sure the POWER switch on the
instrument is set to OFF, then use a USB
cable to connect the USB connector of the
computer to the USB TO HOST connector of
the instrument. When the instrument is turned
on, the computer automatically displays the
“Found New Hardware” window. Click “Locate
and install driver software (recommended)”.
If the window is not displayed automatically, refer
page 104 for “Troubleshooting.” (Some computers
may take a while to display the window.)
5
If a message allowing Windows to search
online for driver software appears, click
“Don’t search online.”
6
If a message prompting you to insert the disk
that came with your device appears, click
[Next].
The system starts the installation.
7
When the installation is complete, the system
displays the message “The software for this
device has been successfully installed.” Click
[Close].
(Some computers may take a while to display the win-
dow.)
The USB-MIDI driver installation is complete.
• The system may ask you to insert a Windows CD-ROM while it
checks for the driver. Specify the “USBdrv2k_” folder of the CD-ROM
drive (such as D:\USBdrv2k_\) and continue the installation.
NOTE
• If the Wizard panel informs you that “The software you are about to
install does not contain a Microsoft digital signature,” click [Yes].
NOTE
• If the “User Account Control” window appears, click [Continue].
NOTE
• If the “Windows Security” window appears, confirm this software is
authored by Yamaha Corporation then click [Install].
NOTE
