MIXER
76 PSR-S550 Owner’s Manual
3
Press the desired [TRACK] button you
want to control.
The selected track will be changed to ON auto-
matically.
4
Control the Parameter ON/OFF or other
parameters in each track.
(Refer to the following instructions.)
Repeat steps 2–4 and set other tracks if neces-
sary.
5
Press [EXIT] to exit from the mixer oper-
ation.
■Track ON/OFF ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
Determines whether each is track ON or OFF
(unmuted or muted)
Select the track you want to set ON/OFF (refer to
steps 1–3 of basic operation on page 75), and then
follow the instructions below.
The selected track will be changed to ON automat-
ically.
1
Press the [TRACK] button again to set it
to OFF.
The button toggles between ON and OFF, and
the [TRACK] button also changes between
Green to unlit.
■Parameter controls ● ● ● ● ● ● ● ● ● ● ●
Enter the Mixer mode (refer to steps 1–3 of basic
operation on page 75), and then set the Volume,
Pan, Reverb Level and Chorus Level.
1
Press the CATEGORY [ ]/[ ] button to
select the desired item.
2
Rotate the dial and set the parameter.
Repeat steps 1–2 and set other tracks if neces-
sary.
3
Press the [EXIT] button to exit from the
mixer operation.
Track ON/OFF and other parameter controls
Volume Determines the Part volume. Range: 0–127
Pan Determines the Pan position. Range: 0–64–127
Reverb
Level
Determines the Reverb depth. Range: 0–127
Chorus
Level
Determines the Chorus depth. Range: 0–127
< >
