ENGLISH
7474
Digital Still Camera Mode
Using the Built in Flash
✤ The FLASH SELECT function works in <M.Cam> mode only.
✤ You can take natural looking flash pictures with appropriate illumination using the built-in flash, whether they are night
scenes, in doors or in other dark places.
■
OFF : The flash does not fire.
■
(Auto) : The flash comes on depending on the brightness of the subject.
■
(Red-eye reduction auto) : The flash pre-fires automatically before the main firing to
reduce the red-eye.
■
(Flash on) : The flash comes on regardless of the brightness of the subject.
Flash Select
1. Set the [Power] switch to [CAMERA].
2. Set the [Mode] switch to [MEMORY].
3. Press the [FLASH ( )] button.
4. Each time you press the [FLASH ( )] button, FLASH mode is changed to;
√ < (Auto)>, < (Red-eye reduction auto)>, < (Flash on)> and < (OFF)>.
Warning!
■
Do not fire the flash with the flash bulb covered with your hand.
■
Do not fire the flash close to people’s eyes.
[ Notes ]
■
FLASH function is not available while Exposure is in use.
■
If the flash is forced to fire (Flash on) in a bright location, the flash effect may not be seen
on the recorded picture.
■
When (Red-eye reduction auto) is set, the flash fires twice-once to perform red-eye
reduction and the second for taking the main picture. There is approximately a 1.5 second
gap between flashes.
1
3
1min
46
√
01040E VPD963 UK~095 3/20/06 1:35 PM Page 74
