ENGLISH
3535
Basic Recording
Recording with Ease for Beginners (EASY.Q Mode)
✤ The EASY.Q function works only in <Camera> mode. ➥page 19
✤ The EASY.Q function allows a beginner to easily make good recordings.
1. Set the [Power] switch to [CAMERA].
2. Set the [Mode] switch to [TAPE].
3. By pressing the [EASY.Q] button, all functions on the Camcorder will be set to off and the
recording settings will be set to the following basic modes:
■
The words <EASY.Q> and <DIS ( )> are displayed at the same time.
4. Press the [Start/Stop] button to start recording.
■
Recording will begin using the basic automatic settings.
5. Press the [EASY.Q] button again in the STBY mode and then turn the EASY.Q mode off.
■
The EASY.Q function will not turn off while you are recording.
■
The Camcorder will return to the settings that were set prior to activating EASY.Q mode.
[ Notes ]
■
In EASY.Q mode, certain functions are not available, such as Menu, BLC, Manual focus.
If you want to use these functions, you must first turn the EASY.Q mode off.
■
The EASY.Q mode settings are deleted when the Battery Pack is removed from the
Camcorder and must be reset when the Battery Pack is replaced.
■
Taking a still image using the [PHOTO] button while EASY.Q is set releases DIS function.
■
Digital Zoom, COLOR NITE or Visual Effect is not available in the EASY.Q mode.
■
16:9 Wide is not available in the EASY.Q mode. (VP-D963(i) only)
■
[PHOTO] button is not available when in 16:9 Wide mode and EASY.Q is activated in 16:9 Wide mode.
(VP-D964W(i)/D965W(i) only)
3
1
60min
0:00:10
SP
STBY
√
01040E VPD963 UK~042 3/20/06 12:30 PM Page 35
