Getting started
20
3. When charging is finished, unplug the adapter
from both the power outlet and the phone by
pressing the buttons on both sides of the
connector and pulling the connector out.
Note
: Do not remove the battery from the phone
without unplugging the adapter while it is
charging. Otherwise, the phone may be
damaged.
Low battery indicator
When the battery is weak and only a few minutes of
talk time remain, the battery sensor will let you
know by blinking the empty Battery Strength icon
( ) and you will hear a warning tone and a ”LOW
BATTERY WARNING!” message will be repeated at
regular intervals on the display. When the battery
becomes too weak for the phone to operate, it
switches off automatically.
Switching on or off the phone
1. Open the phone.
2. Press and hold the key for more than one
second to switch on the phone.
➀
➀
➁
Getting started
21
3. The service light flashes and then the idle screen
appears on the display when the system locates
services.
If the phone is out of the service area, the No
Service icon ( ) appears on the display. In this
case, you cannot place and receive calls. You
can try again later when service is available.
Note
: You can change the display language in the
Language/
menu (
Menu 7-2-6
).
See page 102.
4. When you wish to switch off the phone, press
and hold the key for more than one seconds
until the power-off image displays.
WARNING!
Do not switch on the phone when mobile phone use
is prohibited or when it may cause interference or
danger.
Note
: Do not touch the antenna on the phone
unnecessarily when the phone is switched on.
Contact with the antenna affects the call quality
and may cause the phone to operate at a
higher power level than otherwise needed.
