145
Note:
Emergency number 911 is hard-coded into your phone. You can dial
this number any time, even when the phone is locked or restricted. If
you call 911 an audible tone is heard and an Emergency prompt
appears in the display for the duration of the call.
Important!:
Because of various transmission methods, network parameters,
and user settings necessary to complete a call from your
wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all
wireless networks at all times.
Important!:
DO NOT depend on this phone as a primary method of calling
911 or for any other essential or emergency communications.
Remember to always turn your phone on and check for adequate
signal strength before placing a call.
Store Emergency Numbers
1. From the
Settings
menu, select
Phone Settings
➔
Security
.
You’re prompted to enter the lock code.
Note:
The default lock code is the last four digits of your telephone number.
2. Select the lock code field, enter the lock code, and press
the
OK
soft key.
3. Select
Emergency #
.
4. Select from the three emergency number entries.
5. Enter an emergency number (up to 32 digits in length),
then press the
Done
soft key to save the number that you
entered.
Call Emergency Numbers in Lock Mode
1. In standby mode, enter the emergency number.
2. Press to place the call.
Reset Phone
Reset Phone returns all Settings to their factory default values.
1. From the
Settings
menu, select
Phone Settings
➔
Security
.
You’re prompted to enter the lock code.
Note:
The default lock code is the last four digits of your telephone number.
2. Select the lock code field, enter the lock code, and press
the
OK
soft key.
3. Select
Reset Phone
. You are prompted to confirm that you
want to restore default settings (except for the Contacts
and Voice Dial).
4. To return to the
Security
sub-menu without resetting the
phone, press
No
. To restore default settings, press
Yes
.
