troLAbeshootna
Connecting to a computer
The compute does nol: recognlse
j our camcorder.
Cannot p_aya video file properly on
a PC.
inte -StUdIOdoes noI TURCI.ION
propen_
_ntelli-studio is no! performed.
l he image or sound on your
camcorder is not played on your
computer propeny.
The playDBCK scre@n Is DaUSeO or
dlszor[ed,
• Disconnect the USB cable from the computer and camcorder,
restart the computer, then connect it again correctly,
• A video codec is needed to play the file recorded on your
camcorder, Install the seffware provided with your camcorder,
_page 114
• Make sure you insert the connector in the correct direction, and
connect the USB cable to the USB jack on your camcorder firmly,
• Disconnect the cable from the computer and camcorder, restart
the computer, Cennect it again properly.
• Tb play back an HD video file, a computer with better specification
Jsrequired.
Check a computer with recommended specification, _page 109
- Exit the Intelli--studio application, and restart the Windows
computer.
Set PC Seffware to On in the Settings menu or install Intelli--studio
inthe computer. _pages 83, 114
- Video playback or sound may stop temporarily depending on your
corrlputer. The video or sound copied to your computer is not
affected,
- If your camcorder is connected to a computer that does not
support Hi--speed USB (USB2.0), the image or sound may not be
played correctly, The image and sound copied to your computer
are not afflicted,
o
o
o
Check the system requirements to play a video.
Exit other all applicalions running on the current computer,
If a recorded video is played on your camcorder connected to a
corrlputer, the image may not play smoothly, depending on the
transfer speed, Please copy the fileto your PC, and then play it
back,
