Other Features
64
4
• Forward all incoming messages
except those from specified send-
ers (bit 7=1).
(See P.132 “User Parameters”).
Switching local printing on /
off
You can choose whether your ma-
chine prints copies of messages that it
forwards (by default, these messages
are not printed). To change this set-
ting, adjust bit 6 of switch 11 with the
User Parameters:
• Bit 6=0 : Do not print
• Bit 6=1 : Print
(See P.132 “User Parameters”).
Enabling and disabling the
forwarding mark
The forwarding mark is printed at the
receiving end on the top of each page
of the fax messages that are forward-
ed from your machine. This mark will
help the operator at the other end to
recognize messages that have been
forwarded. If you wish, you can
switch this mark off.
To switch the Forwarding Mark on or
off, adjust bit 1 of switch 2 with the
User Parameters:
• Bit 1=0 : Forwarding mark off
• Bit 1=1 : Forwarding mark on
(See P.132 “User Parameters”).
