Memory Transmission And Immediate Transmission
15
3
Reference
Send Later: see P.21
“Sending
At A Specific Time (Send Lat-
er)”
.
H
Press the
{
{{
{
Start
}
}}
}
key and wait.
The machine will dial the destina-
tion's number.
5551234
SET DOC. OR DIAL NO.
Note
❒
If the other party's line is busy,
your machine will dial
again.P.24
“Redialing”
READY 100% 10:04AM
SET DOC. OR DIAL NO.
❒
If the other party's fax machine
answers, both machines will
connect and yours will send the
message. A name or a label will
appear on the upper line.
❒
If your line goes through a local
switchboard (a PBX) remember
to dial the exit code. Press the
{
Pause
}
key immediately after
the code. If the number includes
a country code, press the
{
Pause
}
key after the country
code, then dial the rest of the
number.
If you like to cancel the
transmission
A Press the {
{{
{Stop}
}}
} key during
communication.
5551234
STOP & CLR FILE? Y/N
B Then press the {
{{
{Yes}
}}
} key to
cancel the transmission.
Immediate Transmission
Immediate Transmission is conve-
nient when:
• You wish to send a message imme-
diately.
• You wish to quickly check whether
you have successful connected
with the other party's fax machine.
• Your machine's memory is getting
full.
The machine dials immediately after
you press the {Start} key (or at the
specified later time, if you used a
time-delay feature like Send Later).
The message is scanned and transmit-
ted page by page without being
stored in memory.
A Make sure that the machine is in
standby mode.
The display should look like this:
READY 100% 10:00AM
SET DOC. OR DIAL NO.
Note
❒ The memory indicator should
go out. If the memory indicator
is lit, press the {Memory} key.
B Place the entire document face
down into the feeder.
TRANSMIT OPTIONi
DIAL FAX NUMBER
Note
❒ No more than 30 pages.
❒ You can dial before you set the
document. Place the document
after you dial the number and
go to step
D
.
