A SERVICE OF

logo

Installation
164
8
Connecting The Power And Switching On
R
CAUTION:
Do not switch on until everything is connected properly.
A Insert the power cable into the socket located at the rear of the machine.
B Plug in the cable to the mains.
C Turn the power switch on.
Important
The supply form the wall outlet must not fluctuate more than 20 V either
side of 115 Vac.
The power cord should not be laid in a place where it might trip somebody.
Do not lay anything on the power cord.
If you have to use an extension cord, make sure that it is capable of carry-
ing 125V/15A, and that your facsimile terminal is the only piece of equip-
ment connected to that cord.
TSTP090N