Prestige PM-D3 Washer Disinfector Section 1
Operating Instructions (cont.) ….
If Decono~Zyme has already
been loaded then continue. If
not, then return to step 3.
IF All Loaded
Press START
Press START button once
The Wash and Disinfection cycle will now commence and proceed automatically as detailed
in “Operating Process” on page 25 of this manual. When the cycle is complete the door will
automatically unlock and the following message will be displayed:
Cycle complete
Press START
The following message sequence will now be displayed and repeated:
WARNING
Chamber Hot
Open Door
Carefully
Unload
Press START
Beware when removing instruments at this time as the temperature
within the chamber can be in excess of 85
o
C.
!
Pausing or Aborting a Wash Cycle
To pause operation at any time during the wash and disinfect cycle, press the START button
once.
To resume operation after pausing, press the START button once.
To abort a wash and disinfect cycle, press the START button once and then the DOOR
RELEASE button. The program will automatically go to drain, the cycle will be aborted, and
the following message will be displayed.
PROGRAM ABORTED
Issue 1 06/10/2004 8
