Prestige Medical PRFL0202 Manual

A SERVICE OF

next previous

Prestige PM-D3 Washer Disinfector Section 1

AWT Fluid Replenishment ….

When full, the AWT Fluid reservoir contains sufficient anti-scaling fluid for around 40 wash

and disinfect cycles. On completion of 25 cycles, the LCD DISPLAY will indicate that more

fluid is required and the unit will not proceed with a new wash and disinfect cycle until you

confirm that it has been added.

To add AWT Fluid, the following procedure applies:

1. Apply Power to the Machine. Press DOOR RELEASE to open door.

2. Unscrew the reservoir cap which is located on the inside rear of the wash

chamber.

3. Using the AWT dispenser bottle, slowly top up the reservoir until it begins to

overflow.

4. Refit the cap on the reservoir.

Issue 1 06/10/2004 12