Prestige PM-D3 Washer Disinfector Section 2
Unpacking ….
Unpacking
Read this manual and familiarise yourself
with all components and controls before
attempting to install or operate the unit.
Carefully unpack your Prestige PM-D3
Washer Disinfector and retain the carton
and all packaging materials. If the unit
needs to be returned to the supplier for
any reason then the original carton and
packaging materials should be re-used.
IMPORTANT
The PM-D3 Washer Disinfector MUST
be connected to a suitable mains power
supply to enable the loading door to be
released.
The unit is despatched with a range of
accessories to enable easy installation
and efficient operation. Their use is
detailed throughout this manual. Open
door and remove basket and accessory
pack (see note above). Ensure that all
these items are present before attempting
to install or operate the unit. Complete the
Enclosures Check List and notify supplier
of any shortages or damaged components
as soon as possible.
The Prestige PM-D3 Washer Disinfector is
not supplied with a printer. This may be
purchased separately. Use the following
code when ordering a printer from your
supplier.
Thermal Printer
Pt # MED1014
Printer Power Supply
Pt # MED1015
Roll of Paper
Pt # MED1014.1
Enclosures Check List
• 1 Grey drain hose
• 1 Blue cold water hose
• 1 Carrier system with divider
• 1 Large Tray c/w Manifold
• 2 Instrument Tray
• 1 Dish Rack
• 6 Hose & Luer Assemblies
• 6 Distal Connectors
• 1 Small Instrument Basket
• 1 Bottle AWT Fluid**
• 1 Pack (10) Decono~Zyme
sachets**
• 1 RS232 data (printer) lead
• 1 Door Release Probe
• 1 Owner’s Manual
Replacement Parts and Consumables
A range of replacement parts and
consumable items approved for use with
the PM-D3 Washer Disinfector may be
purchased from your supplier. The use of
these compatible, approved products will
ensure continued and reliable operation of
you washer/disinfector.
AWT Fluid*
(4 X 0.5 Litre bottle)
Pt # MED1000.09
Decono~Zyme Gel packs**
(100 x 30ml sachets)
Pt # MED1000.10
Using non-approved chemicals,
accessories, and replacement
parts may cause damage to the
machine and could void your
warranty.
!
Issue 1 06/10/2004 15
