Prestige PM-D3 Washer Disinfector Section 2
Setting Date and Time ….
1. Open loading door.
2. Press and hold DOOR RELEASE BUTTON.
3. After a few seconds the following screen will be displayed with
a prompt flashing before the HOUR segment of display. Press
and hold START button until correct HOUR is displayed.
Set Clock & Prog
TIME _00:00:40
4. Momentarily press START button
5. The following screen will now be displayed with prompt
flashing between the HOUR and MINUTES segments of
display. Press and hold START button until correct MINUTES
are displayed.
Set Clock & Prog
TIME 14_00:40
6. Momentarily press START button
7. The following screen will now be displayed with prompt
flashing after SECONDS segments of display. Press and hold
START button until correct SECONDS are displayed.
Set Clock & Prog
TIME
14:30:40_
8. Momentarily press START button
9. The following screen will now be displayed with prompt
flashing before the DAY segment of display.
Press and hold
START button until correct DAY is displayed.
Set Clock & Prog
DATE _01:01:00
10. Momentarily press START button
11. The following screen will now be displayed with prompt
flashing between the DAY and MONTH segments of display.
Press and hold START button until correct MONTH is
displayed.
Set Clock & Prog
DATE 01_08:00
12. Momentarily press START button
13. The following screen will now be displayed with prompt
flashing between the MONTH and YEAR segments of display.
Press and hold START button until correct YEAR is displayed.
Set Clock & Prog
DATE
01:08_00
14. Momentarily press START button
15. The following screen will now be displayed. Holding the
START button will cause display to scroll through programmes
1 to 6. See page 9 for more details on setting the correct
programme.
Set Clock & Prog
PROG 1
16. Press DOOR RELEASE BUTTON once to save changes and exit menu.
Issue 1 06/10/2004 24
