A SERVICE OF

logo

37
FIGURE 44
STEP 44:
99 3/8 X 43mm
105
94
106
10
93
• Route the LEG PRESS CABLE (93) under the weight stack and through the bracket on the TOWER BASE (10) and assemble one
4-1/2” PULLEY (94) to the TOWER BASE (10) using two 3/8 X 43mm BOLTS (99), four 3/8” SAE WASHERS (106) and two 3/8”
LOW HEIGHT LOCK NUTS (105) as shown in FIGURE 44.