STEP 24:
FIGURE 24
23
STEP 25:
FIGURE 25
• SECURELY assemble the MULTI PRESS BACK PAD
(43) to the BACK PAD SUPPORT (7) using two
BLACK RH CAPS (68), two 3/8 X 73mm BOLTS (57),
two 3/8” SAE WASHERS (66), two 3/8” RH WASHERS
(67) as shown in FIGURE 24.
66
3/8 X 32mm 50
3/8 X 73mm 57
67
3
70
43
7
68
BLACK
• SECURELY assemble the MULTI PRESS SEAT PAD
(70) to the SEAT PAD SUPPORT (3) using two
BLACK RH CAPS (68), two 3/8 X 32mm BOLTS (50),
two 3/8” SAE WASHERS (66), two 3/8” RH WASHERS
(67) as shown in FIGURE 24.
63 3/8 X 76mm
BUTTON HEAD
5
31
25
• Slide two 3” ACCORIDIAN SLEEVES
(31) over the shafts on the PIVOT ARM
(5) as shown in FIGURE 25.
• Slide two PILLOW BLOCKS (25) over
the shafts on the PIVOT ARM (5) as
shown in FIGURE 25.
• Assemble four 3/8 X 76mm BUTTON
HEAD BOLTS (63), four 3/8” BLACK
SAE WASHERS (64) and four PILLOW
BLOCK SPACERS (37) to the the
PILLOW BLOCKS (25)
as shown in
FIGURE 25.
BLACK 64
37
0
1
1/2 1/2 1/2 1/2 1/2 1/2
23456
10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
