A SERVICE OF

logo

Open as PDF
next previous
STEP 38:
FIGURE 38
34
STEP 39:
FIGURE 39
• SECURELY assemble the FOOT PLATE (89) to the MAIN & SECONDARY PIVOT ARMS (87 & 88) using four RH CAPS
(109), two 3/8 X 117mm BOLTS (104), four 3/8” SAE WASHERS (106), four 3/8” RH WASHERS (107), and two 3/8” LOW HEIGHT
LOCK NUTS (105) as shown in FIGURE 38.
109
106
107
85
88
87
105
106
107
92
103 3/8 X 73mm
89
3/8 X 117mm 104
108 BLACK
• SECURELY assemble the LEG PRESS BACK PAD (92) to the BACK PAD SUPPORT (112) using two BLACK RH CAPS (108),
two 3/8 X 73mm BOLTS (103), two 3/8” SAE WASHERS (106) and two 3/8” RH WASHERS (107) as shown in FIGURE 39.
112