A SERVICE OF

logo

Open as PDF
next previous
FIGURE 33
STEP 33:
30
• SECURELY assemble the STORAGE PEGS (76) to the STORAGE UPRIGHT (75) using two RH CAPS (69), two 3/8 X 25mm BOLTS
(49), two 3/8” SAE WASHERS (66) and two 3/8” RH WASHERS (67) as shown in FIGURE 33.
• SECURELY assemble the STORAGE UPRIGHT (75) to the TOWER BASE (10) using four RH CAPS (69), two 3/8 X 90mm BOLTS
(58), four 3/8” SAE WASHERS (66), four 3/8” RH WASHERS (67) and two 3/8” LOW HEIGHT LOCK NUTS (65) as shown in
FIGURE 33.
3/8 X 90mm 58
10
67
65
75
69
76
69
66
49 3/8 X 25mm
67
66
• Please refer to the LEG PRESS PARTS LIST to complete the
assembly of the LEG PRESS.