A SERVICE OF

logo

15
STEP 12:
FIGURE 12
STEP 13:
FIGURE 13
3/8 X 50mm 53
42
BLACK 68
66
67
13
SECURELY assemble LAT SEAT PAD (42) to the LAT/LOW SEAT (13) using two BLACK RH CAPS (68), two 3/8 X 50mm BOLTS (53),
two 3/8” SAE WASHERS (66) and two 3/8” RH WASHERS (67) as shown in FIGURE 12.
1/2 X 3” 22
65
14
17
• Assemble the SWIVEL PULLEY (17) to the LAT/LOW FRAME (14) using one 1/2 X 3” SHOULDER BOLT (22), one 3/8” RH
WASHER (67), one 3/8” SAE WASHER (66) one 3/8” LOW HEIGHT LOCK NUT (65) and one RH CAP (69) as shown in FIGURE
13. (NOTE: Tighten connection enough to remove play, yet allowing SWIVEL PULLEY (17) to rotate freely.)
69
66
67
0
1
1/2 1/2 1/2 1/2 1/2 1/2
23456
10 20 30 40 50 60 70 80 90 100 110 120 130 140 150