Troubleshooting 43
7. How do I reset my Kyocera KR1 Mobile Router to its factory default settings?
If other troubleshooting methods have failed, you may choose to Reset the Kyocera KR1 Mobile Router to its factory
default settings.
To hard-reset the Kyocera KR1 Mobile Router its factory
default settings, follow the steps listed below:
1. Ensure the Kyocera KR1 Mobile Router is powered on
2. Locate the
Reset button on the back of the Kyocera KR1 Mobile Router.
3. Use a paper clip to press the
Reset button.
4. Hold for 10 seconds and then release.
5. After the Kyocera KR1 Mobile Router reboots, it is reset to the factory
default settings.
Note: Please note that this process will take a few minutes.
8. What is VPN?
• VPN stands for “Virtual Private Networking.” VPNs create a "tunnel" through an existing Internet connection
using PPTP (Point-to-Point Tunneling Protocol) or IPSec (IP Security) protocols with various encryption
schemes including Microsoft Challenge Handshake Authentication Protocol (MS-CHAP) .
• This feature allows you to use your existing Internet connection to connect to a remote site with added
security.
If your VPN connection is not functional, verify that your VPN dial-up configuration is correct.
Note: This information should be provided to you from your VPN provider.
Pressing the Reset Button
restores the KR1 to its
original factory
default settings.
