10 Kyocera KR1 Mobile Router User Guide
Basic > Wireless (Security–No Encryption)
Wireless Mode-
Enabled is the default . Selecting this option will allow you to set your Wireless Access Point
(WAP) settings. Selecting
Disabled, will grey-out all Security radio buttons (please see
“
Security” below).
SSID- Service Set Identifier (SSID) is the name designated for a specific wireless local area network
(WLAN). The SSID's factory
default setting is KR1. The SSID can be easily changed to
establish a new wireless network.
(Note: SSID names may contain up to 32 ASCII characters).
Channel- Auto Select is the default . Devices on the network must share the same channel. (Note: Wireless
adapters automatically scan and match the wireless settings. You may also select the channel you
wish to use).
Security- You may select from three levels of encryption to secure your wireless network:
No Encryption, WEP, or WPA-PSK.
Security- No Encryption
is the default (as shown in the screen above).
