A SERVICE OF

logo

Open as PDF
next previous
20 Kyocera KR1 Mobile Router User Guide
Advanced > Filters > MAC Filters
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC
addresses from accessing the Network. You can either manually add a MAC address or select the MAC address from
the list of clients that are currently connected to the Broadband Router.
Filters- Select the filter you wish to use; in this case, MAC filters was chosen.
MAC Filters- Choose Disable MAC filters; allow MAC addresses listed below; or deny MAC addresses listed below.
By
default the MAC Filters is Disabled MAC Filters.
Name-
Enter the name here.
MAC Address- Enter the MAC Address.
DHCP Client- Select a DHCP client from the pull-down list; click Clone to copy that MAC Address.