Hewlett-Packard P3010 Manual

A SERVICE OF

next previous

3. To remove the bracket only:: Slide the sheet-metal bracket up to release it, and then remove the

bracket.

NOTE: You might need to slightly pull outward on the lower-right cover (callout 1) to release the

sheet-metal bracket.

Reinstallation tip When you reinstall the bracket, make sure that the tab (callout 2) is engaged

in the slot in the chassis.

Figure 2-53 Remove the lower-right cover (2 of 4)

1

2

4. Raise the right side of the product, slide the lower-right cover toward the back of the product, and

then rotate the cover away from the product.

Figure 2-54 Remove the lower-right cover (3 of 4)

ENWW Removal and replacement procedures 81