CHAPTER 6 REMCS Messages
6.1 Messages in REMCS Windows
55
problem is not solved,
contact the support center.
RMG_0123
Exportation of the environment information
has been completed.
RMG_0124
Exportation of the customer information has
been completed.
Export customer information to a file.
Click the [OK] or [Cancel]
button
Export the environment information to a file.
-
Close this screen after you finish export.
Close the screen after
finishing export.
TABLE 6.20 Messages in the [Connection check] window or [Connection check information] window
Failed to get Machine status. (xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
Invalid CGI parameter specified.
RMG_0004
Failed to make frame screen data. (xxx)
Invalid CGI parameter specified.
Correct the entered value.
RMG_0041
Failed to setting Machine status.(xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
RMG_0053
Execute the connection check. Are you sure?
Click the [OK] or [Cancel]
button
Connection check frame display completed.
RMG_0056
Failed in the connection check notification.
(xxx)
Connection check notification completed.
Invalid E-mail address specified.
RMG_0182
Enter E-mail address of administrator or
installer.
Specify a valid value.
Specify [E-mail address for receiving results.].
TABLE 6.21 Messages in the [Result of connection check] window
Failed to make frame screen data. (xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
Invalid CGI parameter specified.
Failed to setting Machine status. (xxx)
Failed in the connection check
notification.(xxx)
Check whether the network
status is normal.
Connection check notification completed.
None.
Connection check frame display completed.
TABLE 6.22 Messages in the [Temporary Disconnection] window or [Reconnection] window
Failed to get Machine status. (xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
Failed to make frame screen data. (xxx)
Invalid CGI parameter specified.
RMG_0041 Failed to setting Machine status.(xxx)
RMG_0059
Execute temporary disconnection to the
REMCS Center. Are you sure?
Click the [OK] or [Cancel]
button.
Reconnection to the REMCS Center
