CHAPTER 6 REMCS Messages
6.1 Messages in REMCS Windows
52
Connection type mismatch.
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
Invalid E-mail address specified.
Execute registration of REMCS environment
data.After this operation, all events are not
sent to the REMCS Center until connection
check is completed.
Click the [OK] or [Cancel]
button.
Invalid value in [Split size].Please specify it
within the range of 10-100.
Invalid value in [Split size].Please specify it
within the
TABLE 6.14 Messages in the [Periodical Connection settings] window
Failed to get Machine status. (xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
Failed to make frame screen data. (xxx)
Invalid CGI parameter specified.
Failed to get connect mode. (xxx)
Correct the entered value.
Input value is out of range.
Failed to get registration data.(xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
Failed to change Machine status. (xxx)
Confirm the start time and
set a valid end time.
Execute registration of periodical connection
schedule. Are you sure?
Click the [OK] or [Cancel]
button.
Periodical Connection setting frame display
completed.
Failed to register the periodical connection
schedule. (xxx)
Check whether the network
status is normal.
Failed to set the periodical connection
schedule. (xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
Registration of the periodical connection
schedule
Failed in the connection check
notification.(xxx)
Check whether the network
status is normal.
Failed to send notice of changing agent
information.
Failed to send agent information.
TABLE 6.15 Messages in the [Customer Information] window
Failed to get Machine status. (xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
Failed to make frame screen data. (xxx)
Invalid CGI parameter specified.
