CHAPTER 6 REMCS Messages
6.1 Messages in REMCS Windows
47
REMCS Messages CHAPTER 6
This chapter describes the major error messages that are displayed in the windows.
6.1 Messages in REMCS Windows
This section describes the messages displayed in the REMCS windows.
In the messages, xxx represents a character string such as a returned value that should be replaced when
printed out.
TABLE 6.1 Messages common to all windows
Failed to read setting file. (xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
This session was disconnected.(xxx)
This session was disconnected.
performed in the REMCS
window, restart the REMCS
This session was disconnected.
TABLE 6.2 Messages at GUI startup
Failed to get Machine status. (xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
Failed to make frame screen data. (xxx)
Failed to get Machine ID..(xxx)
Change language to English.
Failed to get registration data..(xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
Failed to setting Machine status.(xxx)
Failed to change language to Japanese.(xxx)
Failed to change language to English.(xxx)
Change language to Japanese completed.
Proceed with registration.
Changing language to English completed.
Failed to get Destination information. (xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
The setting file error was detected and
initialized it.
The REMCS frame is not displayed, because
the
REMCS module is not available.
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
TABLE 6.3 Messages in the menu frame
Failed to get Machine status. (xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
Failed to make frame screen data. (xxx)
Invalid CGI parameter specified.
