CHAPTER 6 REMCS Messages
6.1 Messages in REMCS Windows
48
problem is not solved,
contact the support center.
Frame data make completed.
Failed to get connect mode. (xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
REMCS menu close. Are you sure?
Click the [OK] or [Cancel]
button.
TABLE 6.4 Messages in the state display frame
Failed to get Machine status. (xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
Failed to make frame screen data.(xxx)
Invalid CGI parameter specified.
Failed to get connect mode. (xxx)
Failed to get customer information.(xxx)
TABLE 6.5 Messages in the setting progress display window
Failed to get Machine status. (xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
Failed to make frame screen data.(xxx)
Invalid CGI parameter specified.
REMCS menu close. Are you sure?
Click the [OK] or [Cancel]
button.
TABLE 6.6 Messages in the [Customer Information] window
Failed to make frame screen data.(xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
Invalid CGI parameter specified.
Customer Information Registration frame
display completed.
Failed to get registration data..(xxx)
If the error still occurs when
you
retry the operation, exit and
restart the REMCS window
and
try again. If the problem is
not
solved, contact the support
TABLE 6.7 Messages in the initial window
Failed to make frame screen data. (xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
Invalid CGI parameter specified.
Initial frame display completed.
