CHAPTER 4 REMCS Service Operations
4.1 REMCS Operations Overview
24
REMCS Service Operations CHAPTER 4
This chapter describes how to operate the REMCS service.
4.1 REMCS Operations Overview
When the REMCS Center registration is completed or cancelled, the window shown in FIGURE 4.1 [REMCS
initial] window appears. This window also appears when you start REMCS through the MMB Web-UI after
the confirmation of connection to the REMCS Center is completed.
Select the function to perform from the menu on the left side of the window shown in FIGURE 4.1 [REMCS
initial] window.
TABLE 4.1 Items in the REMCS initial window shows the menu items in the REMCS initial window.
FIGURE 4.1 [REMCS initial] window
TABLE 4.1 Items in the REMCS initial window
Updates the registration information.
Customer Information
update
Confirms or changes the customer information.
For details, see 4.2.1 Customer Information update.
Displays or changes the connection information.
Specifies or changes the periodic connection schedule.
Exports the setting information.
Specifies or changes the connection configuration.
Displays the certificate used for transmission in S/MIME format.
Replacement of
certificates
Replaces the certificate used for transmission in S/MIME format.
previous certificate
Replaces the certificate used for transmission in S/MIME format with
the one used earlier.
If a certificate has not been replaced, this item cannot be selected.
Checks the connection to the REMCS Center.
Temporarily disconnects the system from the REMCS Center for cases
such as maintenance.
Re-establishes the connection to the REMCS Center after temporary
disconnection.
Sends the hardware configuration information.
Sends the software configuration information.
Exits the REMCS operations and closes the browser window.
