A SERVICE OF

logo

Open as PDF
next previous
Setting the Blue Switch on the Platen
If printed documents exhibit the following symptoms, adjust the setting of the blue Switch on the Platen.
• Image edges are blurred
• Image edges are affected by white banding
Important
• Always set the blue Switch on the Platen to the ● side for borderless printing. Printing quality may be affec-
ted if the Switch is incorrectly set.
1. Remove any loaded paper that will not be used.
• Rolls (See "Removing the Roll from the Printer.") →P.728
• Sheets (See "Removing Sheets.") →P.755
2. Open the Top Cover.
3. Remove the Cleaning Brush (a).
Troubleshooting
>
Problems with the printing quality
>
iPF6300 Setting the Blue Switch on the Platen
11
961