3. In the Paper Detailed Settings dialog box displayed next, select the desired settings values in C Between Pages
and DBetween Scans in BDrying Time, and then click OK.
(See "Paper Detailed Settings Dialog Box (Mac OS X).") →P.491
Note
• By factory default, Drying Time is deactivated ( Off ) for all paper types.
• To have the printer wait for ink to dry immediately after printing without releasing paper, set Cutting Mode
to Eject in the printer menu.
(See "Specifying the Cutting Method for Rolls.") →P.735
Specifying the Cutting Method for Rolls
How rolls are cut after ejection varies depending on printer settings.
Cutting Method Printer Setting Driver Setting
Automat-
ic
The roll is automatically cut by the Cutter Unit
following printer driver settings.
Media
Menu >
Paper
Details >
(Various
Types of
Paper) >
Cutting
Mode
Automat-
ic
Auto Cut
(See
"Cutting
Roll Pa-
per After
Print-
ing.")
→P.190
Yes
Eject
→P.736
Choose this setting if you prefer not to have
documents dropped immediately after printing,
as when waiting for ink to dry.
To cut the roll with the Cutter Unit, press the
Cut button.
Eject Yes
Man-
ual
→P.737
Choose this setting when using media that can-
not be cut using the Cutter Unit.
Use scissors to cut each document from the
roll after printing. For continuous printing (if
you will cut each page later), select Auto Cut
> Yes or select Print Cut Guideline.
Manual No Yes
Print Cut
Guide-
line
Handling Paper
>
Handling rolls
>
iPF6300 Specifying the Cutting Method for Rolls
6
735
