Setting Item Description, Instructions
Main-
te-
nance
Replace P.head When replacing the Printhead, choose Yes and fol-
low the instructions on the screen. (See "Replacing
the Printhead.") →P.911
Not displayed during a warning message that the re-
maining Maintenance Cartridge capacity is low.
Repl. maint cart When replacing the Maintenance Cartridge, choose
Yes and follow the instructions on the screen. (See
"Replacing the Maintenance Cartridge.")
→P.919
Head
Info
Printhead L Indicates information about the printhead.
Printhead R
Clean Platen Choose Yes to move the Carriage in preparation for
cleaning the Platen.
Inter-
face
Setup
EOP Timer Specify the timeout period before cancellation of
print jobs that cannot be received by the printer.
TCP/
IP
IPv4 IPv4 Mode Choose whether the printer IP address is configured
automatically or a static IP address is entered man-
ually.
Proto-
col
DHCP Specify the protocol used to configure the IP address
automatically.
BOOTP
RARP
IPv4
Set-
tings
IP Address Specify the printer network information when using
a static IP address.
Enter the IP address assigned to the printer, as well
as the network subnet mask and default gateway.
The value that was automatically configured is dis-
played if you have set IPv4 Mode to Automatic.
Subnet Mask
Default G/W
DNS
Set-
tings
DNS Dync up-
date
Specify whether DNS server registration is updated
automatically.
Pri. DNS
SrvAddr
Specify the DNS server address.
Sec. DNS
SrvAddr
DNS Host Name Specify the DNS host name.
DNS Domain
Name
Specify the DNS domain name.
IPv6 IPv6 Support Specify whether to connect via IPv6.
IPv6 StlessAddrs Specify whether a IPv6 stateless address is used.
DHCPv6 Specify whether DHCPv6 settings are used.
DNS
Set-
tings
DNS
Dync
update
State-
full
Addr
Specify whether DNS server registration is updated
automatically.
State-
less
Addr
Printer Parts
>
Control Panel
>
iPF6300 Menu Settings
8
843
