Document No. 10-300090, Issue 1 13-29
IPX
Sample Output The following example:
■ sets the SAP name filter precedence to 1
■ sets the filter-network to 3
■ sets the service-type to 2
■ applies filters to SAP packets in both directions (both)
■ adds the service to the service table (allow)
■ sets the filter hops to 4
on an interface labeled “boston”.
(config-if:boston)# ipx sap-network-filter 1 3 2 both allow 4
Systems P550R, P580, P880, and P882.
{filter | allow} The action to take for the IPX service.
• filter - Do not add the service to the service table
(inbound SAP packets) or do not advertise the service
(outbound SAP packets).
• allow - Add the service to the service table (inbound
SAP packets) or advertise the service (outbound SAP
packets).
<filter-hops> The number of hops to get to the service in the service table
(inbound SAP packets) or in the advertised information
(outbound SAP packets). The range is 0 to 16 hops.
Table 13-12. Parameters, Keywords, Arguments
Name Definition
2 of 2
